Ooops mistake! whilst checking things over before assembling the whole thing I noticed I had fitted the spacers the wrong way round between two of the disks. To sort this out I had to carefully use a knife to cut through the glue and separate the disks away. The spacers got trashed in the process and Im out of spares. Its annoying but the unit should still work with one less disk/spacer. I have now glued a new endplate on and Im waiting for it to set before starting the assembly.
One the up side I have fitted the input pipe as detailed in the previous post and sealed it with some wicks all weather silicone sealant.
No comments:
Post a Comment